How is leather made? From raw hide to upholstery leather
How Is Leather Made? From Raw Hide to Furniture Leather
Leather is one of humanity’s oldest materials. More than 100,000 years ago, people began preserving animal hides to protect themselves from the cold. Over thousands of years, this simple necessity evolved into a highly skilled craft—and later into an industry with precise processes. Today, high-quality leather is one of the most sought-after materials for furniture because it is durable, breathable, long-lasting, and becomes more beautiful with age.
But how does a raw animal hide become a supple covering for chairs, benches, and sofas? In this guide, we explain the leather-making process step by step: from the structure of the hide through soaking, liming, and tanning to dyeing and finishing. We also explain why we use genuine buffalo leather for our furniture. Find out more about the differences between our leather types: Buffalo, Botswana, and Stelvio leather.
Leather Making at a Glance
Beamhouse
The raw hide is cleaned and soaked, and the hair and subcutaneous tissue are removed.
Tanning
Tanning agents bond with the collagen fibers, making the hide permanently durable.
Retanning and Dyeing
Dyes and fats are worked in, giving the leather its color and suppleness.
Finishing
Drying, staking, sanding, or embossing, along with the finish, determine the look and feel.
A Brief Look at History
The first tanning methods were very simple: hides were dried, smoked, or rubbed with fat. Later, people discovered that the bark, leaves, and fruit of certain plants contain tannins that preserve hides permanently. In the Middle Ages, leatherworking was considered one of the most demanding crafts; tanners, saddlers, and shoemakers formed their own guilds. In the 19th century, industrial advances brought new tanning techniques, above all chrome tanning, which made leather softer, more uniform, and more durable in less time.
| Period | Development |
|---|---|
| Prehistory | Drying, smoking, and greasing animal hides |
| Antiquity | Vegetable tanning with bark and leaves |
| Middle Ages | Guild-based tanning trade; leather for clothing, saddles, and books |
| 19th century | Industrialization and the introduction of chrome tanning |
| Today | Combined processes, modern dyeing and finishing techniques, stricter environmental regulations |
What Exactly Is Leather?
Leather is animal hide preserved through tanning, with its natural fiber structure intact. The hide consists essentially of two layers: the upper papillary layer is fine-grained and forms the visible grain side, with its characteristic pattern of hair follicles. Beneath it lies the reticular layer, made up of densely interwoven collagen fibers, which gives leather its mechanical strength. The denser this network of fibers, the more tear-resistant and durable the leather.
| Layer | Characteristic | Importance for Furniture |
|---|---|---|
| Papillary layer (grain side) | Fine-grained, visible texture | Determines appearance and feel |
| Reticular layer | Dense network of fibers | Provides tear resistance and dimensional stability |
| Split leather | Lower layer without the grain surface | Less durable, often coated |
High-quality furniture coverings are made from full-grain leather, the upper layer with its intact grain surface. Split leather is less expensive, but is usually sanded or coated and does not last as long.
Step 1: The Beamhouse
After delivery, the raw hides are first preserved and sorted. The actual processing begins in the so-called beamhouse:
- Soaking: The hides are soaked in water, cleaned, and restored to their original moisture content.
- Liming: An alkaline bath loosens the hair and epidermis and opens up the fiber structure.
- Fleshing: Machines remove subcutaneous tissue and fat remnants from the flesh side.
- Splitting: If needed, the hide is divided into grain leather and split leather and brought to a uniform thickness.
- Deliming and bating: The hide is neutralized and softened with enzymes.
Step 2: Tanning
Tanning is the heart of leather making. Tanning agents penetrate the hide and bond with the collagen fibers. This makes the hide resistant to decay while allowing it to remain flexible. There are several tanning methods, each with different properties:
| Method | Tanning Agent | Properties | Typical Uses |
|---|---|---|---|
| Chrome tanning | Chromium(III) salts | Soft, heat-resistant, evenly dyeable, fast | Furniture, shoes, clothing |
| Vegetable tanning | Bark, wood, and fruit extracts | Firmer, natural scent, pronounced patina | Saddlery, belts, bags |
| Chrome-free tanning | Synthetic or aldehyde tanning agents | Light-colored, takes dye well | Automotive leather, specialist applications |
| Combination tanning | A combination of several methods | Combines softness and strength | High-quality furniture leathers |
After tanning, excess water is pressed out, and the leather is sorted by quality and thickness.
Step 3: Retanning, Dyeing, and Fatliquoring
This is when the leather gets its character. Retanning agents, dyes, and fats are worked in rotating drums. The dyes penetrate deep into the pores without altering the surface structure, leaving the natural grain visible. Fats make the leather supple and give it a pleasant feel. Our Botswana leather is hand-dyed in Italy, resulting in particularly even, rich colors.
Step 4: Drying and Finishing
After dyeing, the leather is dried—hanging, stretched on frames, or under vacuum. It is then mechanically softened by staking. The final appearance is determined during finishing:
| Finish | Result |
|---|---|
| Aniline | Dyed throughout, little to no topcoat, very natural |
| Semi-aniline | Thin protective layer, natural and somewhat easier to care for |
| Pigmented | Opaque color layer, very durable, less natural-looking |
| Washed / Used | Intentionally irregular appearance, e.g. Buffalo Anthracite Washed |
| Embossed | Artificially embossed grain, often used on split leather |
Finally, the leather is measured, checked for defects, and sorted into quality grades.
Why We Use Buffalo Leather
We use genuine buffalo leather for our leather chairs, benches, sofas, and armchairs. Compared with conventional cowhide, it is thicker and has much larger pores, giving it a distinctive appearance and unique feel. Natural scars, insect bites, and color variations remain visible, making every piece unique.
- Durable and long-lasting: ideal for heavily used furniture such as dining chairs and benches.
- Natural and unique: every hide has its own grain pattern.
- Rich color: the dyes penetrate the pores without altering the surface.
- Patina: over time, the leather develops a distinctive, warm appearance.
We offer buffalo leather in two varieties: Buffalo, with a rustic grain in seven colors, and Botswana, hand-dyed in Italy and available in five colors.
How to Recognize Genuine and Faux Leather
| Test | Genuine Leather | Faux Leather |
|---|---|---|
| Surface | Irregular pores and grain marks | Uniform, repeating pattern |
| Cut edge | Fibrous | Fabric backing visible |
| Feel | Warm, supple | Cool, rubbery |
| Smell | Natural | Chemical |
| Aging | Develops a patina and becomes softer | Can crack and peel |
From Finished Leather to Furniture Upholstery
Once the leather has been finished, work begins in the upholstery workshop. Each hide is inspected on the cutting table: areas with pronounced fat wrinkles or deep scars are used for less visible parts, such as the back, while the finest sections are used for the seat and backrest. Since no two hides are alike, cutting requires experience and a keen eye.
- Cutting: The pattern pieces are positioned so the grain and fiber direction suit the direction of stress.
- Sewing: Seams are sewn with tear-resistant thread; decorative stitching accentuates the shape of the chair.
- Upholstering: The leather is stretched over the padded seat and neatly secured at the edges.
- Final inspection: Tension, seams, and surface are checked before the furniture is packaged.
Leather and Sustainability
In most cases, furniture leather is a by-product of the meat industry: otherwise, the hides would be discarded. A durable leather piece of furniture that is used for many years is therefore often more sustainable than an upholstery covering that has to be replaced after a short time. Modern tanneries in Europe are subject to strict regulations on wastewater and chemicals. Taking proper care of leather extends the life of your furniture—and conserves resources.
Furniture Made with Genuine Buffalo Leather
| Model | Type |
|---|---|
| FLEET OHIO | Cantilever chair |
| FLEET BADSAAL | Cantilever chair |
| FLEET SHANGHAI | Dining bench |
| FLEET 65 | High bench |
| RETRO RUMBA | Armchair |
| STUTTGART | 3-seater sofa |
View more models in leather chairs and dining benches. Find tips on choosing them in leather chairs for the dining room and leather benches.

Cantilever chair for the dining room

3-seater sofa, upholstery of your choice

Cantilever chair for the dining room

Leather high bench
Care: keeping leather beautiful for longer
- Dust with a soft cloth, wipe lightly damp if necessary.
- Blots stains immediately, do not rub.
- No harsh chemicals: solvents, thinners, acetone, petrol, trichloroethylene, abrasives and chlorine damage leather.
- Location: avoid direct sunlight and proximity to heaters.
Frequently Asked Questions
How is leather made?
The raw hide is cleaned, dehaired and defleshed, then tanned, dyed, oiled, dried and finished.
What is the difference between chrome-tanned and vegetable-tanned leather?
Chrome-tanned leather is softer and can be dyed more evenly, while vegetable-tanned leather is firmer and develops a rich patina.
How long does leather production take?
Depending on the process, from a few days to several weeks; vegetable tanning takes significantly longer than chrome tanning.
What is full-grain leather?
Leather from the top layer of the hide with the intact grain side. It is more durable and higher quality than split leather.
Are scars and insect bites defects?
No, they are signs of authenticity and make every piece of furniture unique.
Discover furniture made from genuine buffalo leather
Chairs, benches, armchairs and sofas in buffalo and Botswana leather, made to your specifications.